 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Voltage Variable Absorptive Attenuator 30 dB, 0.5-2.0 GHz Features * * * * * * * * Single Positive Voltage Control: 0 to +5 Volts 30 dB Voltage Variable Attenuation 2 dB Linearity from BSL Low DC Power Consumption Temperature Range: -40C to +85C SOIC-8 Plastic Package Tape and Reel Packaging Available Fast Switching Speed AT-110-2 V1 Functional Schematic 1,2,3 8 7 6 5 Description M/A-COM's AT-110-2 is a GaAs MMIC voltage variable absorptive attenuator in a low-cost SOIC 8lead surface mount plastic package. The AT-110-2 has a faster switching speed than the AT-108 or AT-109. The AT-110-2 is ideally suited for use where linear attenuation fine tuning and very low power consumption are required. Typical applications include radio, cellular, GPS equipment and automatic gain/level control circuits. The AT-110-2 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. 1 2 3 4 1. VCC = +5 VDC 0.5 VDC @ 300 A maximum. 2. VC = 0 VDC to +5 VDC @ 6 mA maximum. 3. External DC blocking capacitors are required on all RF ports. Pin Configuration Pin No. 1 2 Function Ground Ground RF Port VCC Pin No. 5 6 7 8 Function VC Ground RF Port Ground Ordering Information Part Number AT-110-2 AT-110-2TR Package SOIC 8-Lead Plastic Package Forward Tape and Reel 3 4 Note: Reference Application Note M513 for reel size information. Absolute Maximum Ratings 4,5 Parameter Input Power Supply Voltage VCC Control Voltage VC Operating Temperature Storage Temperature Absolute Maximum +21 dBm -1 V < VCC < +8 V -1 V < VC < VCC + 0.5 V -40C to +85C -65C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Voltage Variable Absorptive Attenuator 30 dB, 0.5-2.0 GHz Electrical Specifications6: TA = 25C, Z0 = 50 Parameter Insertion Loss Attenuation Flatness (Peak to Peak) VSWR Trise, Tfall Ton, Toff Transients AT-110-2 V1 Test Conditions 0.5 - 1.0 GHz 1.0 - 2.0 GHz 1.0 GHz 1.0 - 2.0 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz -- 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In-band Units dB dB dB dB dB dB Ratio S S mV Min. -- -- 37.5 25 -- -- -- -- -- -- Typ. 2.8 3.3 -- -- 0.5 1.2 2:1 0.2 0.2 70 Max. 3.0 3.6 -- -- 0.8 1.5 -- -- -- -- 6. The RF ports must be blocked outside of the package from ground or any other voltage. SOIC-8 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Voltage Variable Absorptive Attenuator 30 dB, 0.5-2.0 GHz Typical Performance Curves @ 25C Attenuation vs. Control Voltage, F = 900, 1800 MHz 0 1800 900 AT-110-2 V1 Attenuation vs. Temperature, Normalized to +25C , F = 900 MHz 3 -40C 2 +85C -10 1 -20 0 -1 -30 -2 -40 5 4 3 2 1 0 -3 5 4 3 2 1 0 Control Voltage (V) Control Voltage (V) Insertion Loss vs. Frequency 4 Return Loss vs. Control Voltage, F = 900 MHz 0 3 -10 2 -20 1 -30 0 0.5 -40 1.0 1.5 2.0 5 4 3 2 1 0 Frequency (GHz) Control Voltage (V) 1 dB Compression vs. Control Voltage, F = 900 MHz 40 IP3 vs. Control Voltage 40 30 30 20 20 400 MHz 900 MHz 10 10 0 5 4 3 2 1 0 0 5 4 3 2 1 0 Control Voltage (V) Control Voltage (V) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of AT-110-2TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |